Frequently Asked Questions

A tripping circuit breaker is a sign that there is an electrical overload somewhere in your home. Try unplugging some of your appliances and devices to reduce the load on your circuits. If the problem persists, you may need to call a licensed electrician to investigate and make any necessary repairs or upgrades.

If your home was built more than 30 years ago, or if you have an older fuse box instead of a circuit breaker panel, your electrical panel may be outdated. Other signs of an outdated panel include frequent circuit breaker trips, flickering lights, and burning smells. If you suspect that your electrical panel is outdated, you should have it inspected by a licensed electrician.

There are several ways to reduce your energy costs, including upgrading to energy-efficient appliances, installing LED lighting, and using a programmable thermostat to control your heating and cooling. You can also reduce your energy consumption by turning off appliances and devices when they are not in use, and by making sure your home is well-insulated.

If you experience an electrical shock, seek medical attention immediately. Even a minor shock can have serious consequences. In the meantime, turn off the power to the area where the shock occurred and avoid touching any electrical devices or equipment.

To reduce the risk of electrical fires, make sure your home's electrical system is up-to-date and well-maintained. Have your wiring and electrical panel inspected by a licensed electrician regularly, and replace any damaged or outdated equipment. You should also avoid overloading your circuits and make sure your electrical devices and appliances are properly grounded.

It's generally not recommended for homeowners to do their own electrical repairs, as it can be dangerous and may not comply with local building codes. It's best to hire a licensed electrician to ensure that any repairs or upgrades are done safely and up to code.

There are a few possible reasons why an outlet may stop working, including a tripped circuit breaker, a blown fuse, a loose wire connection, or a faulty outlet. Try resetting the circuit breaker or replacing the fuse first, and if that doesn't work, call an electrician to investigate.

Lights can flicker due to a variety of reasons, including a loose or faulty bulb, a faulty switch, or voltage fluctuations. If changing the bulb or tightening the switch doesn't fix the problem, it may be a more serious issue that requires an electrician's attention.

Signs that your electrical panel may need to be upgraded include frequently tripping breakers, flickering lights, burning smells, and outdated components. If you're experiencing any of these issues, call an electrician to assess your electrical panel and recommend any necessary upgrades.

If an appliance keeps tripping a GFCI outlet, it could be due to a ground fault in the appliance or a faulty GFCI outlet. Try plugging the appliance into a non-GFCI outlet to see if that solves the problem. If the appliance still trips the non-GFCI outlet, it may need to be repaired or replaced. If the GFCI outlet is faulty, it should be replaced by a licensed electrician.

If you see sparks coming from an electrical outlet, immediately turn off the power to that outlet by flipping the circuit breaker or unplugging the device. Sparks could indicate a loose wire or a damaged outlet, which could be a fire hazard. Call an electrician to inspect and repair the outlet.

The cost to upgrade an electrical panel can vary widely depending on several factors, including the size of the panel, the complexity of the installation, and the geographic location. On average, homeowners can expect to pay between $1,000 to $3,000 for an electrical panel upgrade. However, the cost can be higher for larger homes or those with more complex electrical systems.

​

It's important to note that an electrical panel upgrade is not a DIY project and should be done by a licensed electrician. The electrician will be able to provide a more accurate estimate based on the specifics of your home's electrical system and the type of panel upgrade needed. It's also worth noting that upgrading an electrical panel can improve safety and increase the value of your home, so it may be a worthwhile investment.

The cost to wire a hot tub can vary widely depending on several factors, including the size of the hot tub, the distance from the electrical panel to the installation location, and the local building codes. On average, homeowners can expect to pay between $1,300 to $2,500 for hot tub electrical wiring.

​

It's important to note that wiring a hot tub is a complex electrical project and should be done by a licensed electrician. The electrician will need to install a dedicated circuit breaker, a GFCI (ground-fault circuit interrupter) protection device, and a disconnect switch. They will also need to run conduit and wiring from the electrical panel to the hot tub, and possibly install a new sub-panel if the electrical system requires it.

Additional costs to consider may include the cost of permits, inspections, and any upgrades or modifications needed to meet local building codes.

Overall, the cost of wiring a hot tub can vary widely depending on the specifics of the project. It's best to consult with a licensed electrician for an accurate estimate based on your specific needs and location.

If you see sparks coming from an electrical outlet, immediately turn off the power to that outlet by flipping the circuit breaker or unplugging the device. Sparks could indicate a loose wire or a damaged outlet, which could be a fire hazard. Call an electrician to inspect and repair the outlet.

Yes, electricians can help with energy-efficient upgrades like installing LED lighting, programmable thermostats, and energy-efficient appliances.

Regular electrical inspections by a licensed electrician can help ensure that your electrical system is safe and up to code. Additionally, you can take steps like avoiding overloading outlets and using surge protectors to protect your electronics.

Yes, all of our electricians are fully licensed and certified to perform electrical work in the Calgary area.

Yes, we are fully insured and carry $5 million liability insurance to protect our clients and their property.

Our pricing is based on the specific requirements of each project. We offer competitive rates and provide detailed quotes for all work before beginning any project.

We provide a wide range of electrical services, including installation, maintenance, and repair for residential, commercial, and industrial clients. Our services include lighting installations, electrical panel upgrades, electrical inspections, and more.